Installing And Removing A Memory Module; Dimm Population Table - Gigabyte MS33-AR1 User Manual

1-4-2 Installing and Removing a Memory Module

Before installing a memory module, make sure to turn off the computer and unplug the
power cord from the power outlet to prevent damage to the memory module.
Be sure to install DDR5 DIMMs on this motherboard.
Follow these instructions to install a DIMM module:
1. Insert the DIMM memory module vertically into the DIMM slot and push it down.
2. Close the plastic clip at both edges of the DIMM slots to lock the DIMM module.
3. Reverse the installation steps when you want to remove the DIMM module.

1-4-3 DIMM Population Table

Type
RDIMM
RDIMM 3DS
2
Ranks Per DIMM
and Data Width
SRx8 (RC D)
SRx4 (RC C)
SRx4 (RC F) 9x4
DRx8 (RC E)
DRx4 (RC A)
DRx4 (RC B) 9x4
(4R/8R)x4
(RC A)
*1DPC applies to 1SPC or 2SPC implementations (SPC - Sockets Per Channel)
Hardware Installation
1
Speed (MT/s); Voltage (V);
DIMM
DIMM per Channel (DPC)
Capacity
(GB)
1DPC*
16Gb
16GB
32GB
32GB
32GB
4800
64GB
64GB
2H-128GB
4H-256GB
- 15 -
2
2DPC
1.1V
4400