Adjusting Head Support - Graco NAUTILUS Child Restraint/Booster Seat Owner's Manual

15.0 Adjusting Head Support

When using with or without the built-in
harness.

BEFORE adjusting the head support height,
have your child lean forward slightly.
Squeeze the red adjustment handle on

top of seat and pull back support up until it
snaps into one of the 5 height positions.
To lower, squeeze red adjustment handle
and push down.
CHECK to make sure it is securely snapped
into one of the 5 height positions by pulling
up on head support.
The shoulder belt guides must be even with
or just above the shoulders as shown by
Ë
dotted line .
Ë
47