Removing And Attaching Base; Adjusting Handle - Graco 8474 Owner's Manual

2.1 Removing and Attaching Base

To remove infant restraint, squeeze release
handle at back of seat and lift infant
restraint from base as shown
To put infant restraint in base, push infant
restraint down until it clicks into base.
Pull up on infant restraint to be sure
it is latched firmly into base.

2.2 Adjusting Handle

1. Press handle adjustment buttons on
both sides of handle
2. Rotate handle until it clicks into any
of three positions (for carrying,
reclining, or sitting). BOTH handle
adjustment buttons must pop out
to lock handle in place
3. Push and pull on the handle to be
sure it is locked firmly in position.
.
.
.
8
Carrying
Reclining
Sitting