Adjusting Handle; Removing And Attaching Infant Restraint - Graco PD162492A Owner's Manual

4.1 Adjusting Handle

1. Press handle adjustment buttons on both
sides of handle
2. Rotate handle until it clicks into any of the
4 positions:
Position A: MUST be used
Position A,B,C,D: may be used in vehicle.
BOTH handle adjustment
buttons must pop out to lock
handle in place
3. Push and pull on the handle
to be sure it is locked firmly in
position.

4.2 Removing and Attaching Infant Restraint

To remove, squeeze release handle at back of
infant restraint and lift out of base as shown
To put infant restraint in base, push infant
restraint down until it clicks into base. Pull up
on infant restraint to be sure it is latched
firmly into base.
.
when carrying by handle,
.
Carrying
.
16
A B
Sitting
D
C