Table of Contents
Advertisement
8
Connecting cables
Always use the USB cables and RS-232C cable interface cables provided by Olympus. If you use the
CAUTION
commercially available USB2.0 cables or hubs, the system operations cannot be ensured.
· Before connecting or disconnecting cables, set the main switch to
NOTE
from the outlet.
· This product contains the motorized parts. For safety purposes, connect the power cord plug last.
· Cables are vulnerable when bent or twisted. Never subject them to excessive force.
· Be sure to connect only cables specified by Olympus to the connectors.
Connect the connectors in the correct orientation paying attention to the shape of the connector.
If the connector is attached with clamping screws, be sure to tighten them.
· When connecting PC to the control box (BX3M-CBFM), connect only either of the USB cable or the
RS-232C cable.
LED connector
74
Coded revolving nosepiece
BX3M-CBFM
Relay unit for coded
revolving nosepiece
GX-IRFES
(OFF) and unplug the power cord
Control box
The RS-232C cable
the USB cable
* Only one type is usable.
Hand switch
BX3M-HS
ΦΦΦ
Hand switch
for exposure
U-HSEXP
ΦΦΦ
or
Advertisement
Table of Contents
