Inserting A Pause In The Sequence; Reviewing Recordss; Changing Records S Memory; Deleting Records S Memory - GE 21008 User Manual

3. Press a memory location key (01-50) to store a redial phone number in
that memory location, or press cid/vol (up and down arrow) button to
scroll to the desired memory location.
4. Press the MEM key and ENTER NAME shows on the display.
5. Use the touch-tone pad to enter the name, and then press the MEM
button again and ENTER TEL NUMBR shows on the display.
6. Press the redial button to display the redial number.
7. Press the MEM key again to confirm.
NOTE: If the redial number is longer than 20 digits, the redial number cannot
be stored in memory.
I P
NSERTING A AUSE IN THE
Press the # button on the handset's touch-tone pad to insert a delay in
dialing sequence when a pause is needed to wait for a dial tone (for
example, after you dial 9 for an outside line, or to wait for a computer
access tone.) Each pause counts as one digit in the dialing sequence.
R R
EVIEWING ECORDS
1. Make sure the phone is OFF (not in talk mode).
2. Press the MEM key to display SELECT MEMORY 01-50.
3. Press the cid/vol (up or down arrow) buttons to scroll the records, or use
the handset's touch-tone pad to enter the memory location number.
C R
HANGING ECORDS
Follow the procedure for Storing Names and Numbers in Memory, except
replace a stored telephone number with a new one.
D R
ELETING ECORDS
1. Make sure the phone is OFF (not in talk mode).
2. Press the MEM key to display SELECT MEMORY 01-50.
3. Press the cid/vol (up or down arrow) button to scroll to the record you
want to delete or use the touch-tone pad to enter the desired memory
location.
D S
IALING
S M
TORED IN EMORY
S M
TORED IN EMORY
S M
TORED IN EMORY
( S
EQUENCE OF A
N )
TORED UMBER
25