Andset Sound Signals - GE 21008 User Manual

HANDSET NEEDS
REGISTRATION
SEARCHING
OUT OF RANGE
PAGING or
PAGING FROM
BLOCKED NUMBER
REPT
NO CALLS
NO DATA
NEW CALL XX
Low Battery
LONG DISTANCE
H S
ANDSET OUND
Signal
A long warbling tone (with ringer on)
Three short beeps
One short beep (every 7 seconds)
34
Indicates you must register a non-registered
handset prior to use
Indicates handset is searching for the base.
Indicates handset is too far away from the base.
Move closer to the base.
Someone pressed the page/int button on the
base or handset.
Indicates the person is calling from a number
which is blocked from transmission.
Indicates a repeat call message. Indicates a new
call from the same number was received more
than once.
Indicates there are no CID records in memory.
Indicates no CID information was received , you
are not subscribed to CID service, or CID service
is not working.
XX represents the number of new CID records not
reviewed.
Indicates the battery needs to be charged.
Indicates CID record is from a long distance call.
S
IGNALS
Meaning
Signals an incoming call
Page signal
Low battery warning