Table of Contents
Advertisement
Inserting a Pause in the Dialing Sequence
Press the #PAUSE button on the touch-tone pad twice to insert a delay in the dialing
sequence of a stored telephone number when a pause is needed to wait for a dial tone (for
example, after you dial 9 for an outside line, or wait for a computer access tone.) A pause
shows on the display as a P. Each pause counts as 1 digit in the dialing sequence. If you need
a longer pause, press the #PAUSE button twice again.
Reviewing a Stored Number
1. Make sure the phone is OFF (not in talk mode).
. Press the MEMORY soft key to enter the main menu.
3. Use the
or
5
6
-OR-
Press the -9 key to search for the desired record alphabetically. For example, if the
record names starts with the letter "N", pressing the 6 key will automatically skip to the
records starting with the letter "M". The 6 button can then be pressed multiple times
until the records starting with the letter "N" are displayed. You can then use the
button to scroll to desired record.
6
4. Press the VIEW soft key to review the detail information of the record.
NOTE: The handset can access the base memory as well as the handset
memory. To access the base memory from the handset, press the
memory soft key and then press the BASE soft key.
Changing a Stored Number
1. Make sure the phone is OFF (not in talk mode).
. Press the MEMORY soft key to enter the phone book.
3. Use the
or
5
6
4. Press the OPTIONS soft key to access the option menu.
5. Use the
or
5
6
6. Press the SELECT soft key to confirm.
7. Repeat Steps 6 through 10 in Storing CID Records in Internal Memory.
button to scroll to desired record.
button to scroll to desired record.
button to scroll to EDIT.
or
5
37
Advertisement
Table of Contents
