Blender Jar Operation - Cuisinart SmartPower CPB-300C Instruction And Recipe Booklet

ASSEMBLY
After washing all parts, please see below for assembly. Place base on flat
surface and plug in.
Blender Jar
Assembly
1. Turn blender jar (a) 1. Place cup on fl at
upside down. surface.
2. Place blade assembly 2. Attach blade
(b) on the round assembly on round
opening of the jar opening of the cup
and turn clockwise and turn clockwise
until tightened. until tightened.
3. Stand jar upright, 3. Place on blender
place cover with base.
pour lid in place on
blender jar.
4. Place on blender
base.
6
Travel Cup Chopping
Assembly
Cup Assembly
1. Place cup on fl at
surface.
2. Attach blade
assembly on round
opening of the cup
and turn clockwise
until tightened.
3. Place on blender
base.

BLENDER JAR OPERATION

1. With the base unit on the tabletop and unit plugged in, place the
blender jar assembled with the blade assembly onto the base and
secure into place. The unit automatically is activated and in Standby
mode with the red POWER LED light illuminated and flashing.
Note: Blade assemblies are interchangeable based on recipes and
desired end results.
2. Add food ingredients. Replace the cover. You may add more
ingredients by lifting the measured pour lid and dropping ingredients
through the fill area. Replace the pour lid after adding ingredients.
Do no put hands into jar with blender in Standby mode.
Note: To remove blender jar cover, lift edge of cover upward. Do not
use measured pour lid to remove cover.
3. For continuous blending, press the desired speed. The blue LED light
will illuminate, indicating that the blender is on and running. It is
possible to switch between High and Low speeds by simply pushing
the desired speed button.
4. To pause the blending process, press the activated speed button.
The blending process will stop. The red Standby indicator light will
continue to flash to let you know that the blender is still activated.
To re-engage a function, choose the desired speed.
5. To pulse, push the Pulse button. The blue Pulse indicator light will flash.
Next, push and release the desired speed button. Repeat as needed.
While pulsing, active indicator lights will be lit. The Pulse function can
be used to break apart larger pieces of food. The Pulse function is also
effective for starting the blending process when you do not want
continuous power or processing items that do not require an extended
amount of blending.
6. When you have finished blending, press the activated speed to put unit
in Standby mode. Then, remove the blender jar from the base. Pour out
ingredients. NEVER TOUCH THE BLADE ITSELF. Unplug the unit.