Table of Contents
Advertisement
BLENDER ASSEMBLY
Wash blending cup, lid and blade assembly in
warm soapy water, rinse and dry.
All parts (except the motor base) are TOP RACK
only dishwasher safe.
NOTE: Be careful when handling the blades as
they are extremely sharp.
1. Place motor base on a flat level surface.
2. Remove blades and position the cup with
opening facing up.
3. Add ingredients avoiding filling past the MAX
line indicated on the cup.
4. Secure the blade assembly onto the cup by
turning clockwise until tightened.
5. Ensure the blade assembly collar is securely in
place before inverting the cup to blend.
BLENDER OPERATION
The blender will only operate when the blades
and cup are correctly assembled. This engages
the safety interlock switch, and allows the blender
to operate.
With liquids inside invert the cup, and place onto
the motor base using the alignment graphics and
turn clockwise to lock into place. A blue light ring
will blink on the power dial to indicate the unit is
ready to operate.
Select the LOW or HIGH speed to commence
blending. Use PULSE for short speed bursts ( hold
and release power dial for short bursts of power).
This can be used to break up larger pieces of
food or when making smoothies with frozen fruits
or crushing ice.
Blend until ingredients are combined.
The blender has an auto-stop feature after 60
seconds.
Turn blender to OFF, wait a few secs then unlock
blender cup from the base. Invert the cup and
turn the blade assembly collar anti-clockwise to
remove. Attach the travel cup lid.
NEVER TOUCH THE BLADES
Turn off the power and unplug when finished
blending.
BLENDER OPERATING
AND SAFETY TIPS
•
Make sure the electrical outlet is rated at the
same voltage as that stated on the bottom of
the blender motor base.
•
Don't remove blending cup while unit is
running.
•
Don't place blade assembly onto motor
base without the blending cup attached.
•
Make sure blade assembly is tightly attached
when utilizing the blending cup.
•
Always remove blade assembly before
cleaning.
•
Never use metal utensils, as damage may
occur to the blending cup or cutting
assembly.
•
Don't overload blending cup. If the motor
stalls, turn the blender off immediately,
unplug the unit and let it cool for at least 15
minutes. Then, remove a portion of the food
and continue.
•
CAUTION: Never use carbonated
beverages in the blending cup.
•
Don't blend hot liquids in blending cup.
•
Do not attempt to mash white potatoes or
knead bread dough in the blending cup.
•
Don't use any container or accessories not
recommended by Cuisinart. Doing so may
result in injury.
•
To remove blending cup, turn slightly
counterclockwise before lifting.
•
The blending cup is not recommended for
microwave use.
NOTE: THE BLENDER WILL NOT TURN ON IF
IT IS NOT LOCKED INTO PLACE CORRECTLY.
6
Advertisement
Table of Contents
