Function Wi-Fi - Ariston Wi-Fi Manual

Hybrid electric water heater (WiFi model) – OPERATING AND MAINTENANCE INSTRUCTIONS FOR THE USER
Medium/low NTC sensor
231 (heating element zone):
protection activated (1° level)
Low NTC sensor (heating
232 element zone): protection
activated (2° level)
Impressed current anode: short
240
circuit
Impressed current anode: open
241
circuit
314 ON/OFF repeated
321 Main circuit board issue
333 Error Wi-Fi board
7.16

Function Wi-Fi

Setup Wi-Fi
For detailed information on the WiFi configuration and product registration procedure refer to the enclosed, dedicated
connectivity Quick Start Guide.
Account Creation
•
1. First download and install the dedicated App on your mobile phone (App name can be found in the
quick start guide).
2. Open the App, click on the SIGN UP button and fill in all the fields
3. Open the registration reply message received in your mailbox and click on the link to activate the user
account.
Wi-Fi configuration and product registration
•
1. Touch the Wi-Fi button
lamp will flash slowly.
2. Press the Wi-Fi button
button indicator lamp will flash quickly (13 flashes per second),
meanwhile, the display will show AP" icon (see pic.).
3. Log it to the App and follow the wizard
4. The connection is successful when:
the 'AP" icon disappears and the WI-FI icon appears on the display;
-
the Wi-Fi indicator lamp will stay on and steady;
-
the App shows the successful registration message.
-
OFF OFF
OFF OFF
OFF OFF
OFF
OFF
Electronic circuit codes key
OFF OFF
OFF OFF
ON ON
and the Wi-Fi button indicator
again for 5 seconds, the Wi-Fi
60
Reset the product by pressing the
ON/OFF key twice. If the error re-
occurs, replace the main circuit board
Check for the presence of water
inside the product: fill, if necessary.
Check, and if necessary correct, the
anode connection to the main circuit
board. Check, and if necessary,
correct the connections on the flange:
black wire on the anode, white wire on
earth
Wait for at least 15 minutes before
unblocking the product. Press the
ON/OFF key twice
Reset the product by pressing the
ON/OFF key twice. If the error re-
occurs, replace the main circuit board
Reset the product by pressing of
ON/OFF button two times. If the error
appear again replace
communication cable MB - Wi-Fi. If
the error appear again replace the Wi-
Fi board
the