Editing Or Deleting A Location; Navigating Back To Start; Stopping Navigation; Viewing Gps Information - Garmin Forerunner 910XT Owner's Manual

compass Features
On the compass, the arrow
toward the location. The compass also
displays the distance
the location.
➊

Editing or Deleting a Location

1
Select MODE > gPS > go to
Location.
2
Select a location.
3
Edit the information or select Delete.

Navigating Back to Start

Before you can navigate to your starting
location, you must be training with GPS,
and you must start the timer.
At any point during your run, you can
return to your starting point.
During your run, select MODE > gPS
> Back to Start.
Navigation
points
➊
and time to
➋ ➌
➋
➌
NOTE: If you are using every second
recording (page
several seconds to determine your
starting location.
The map appears. A line appears on
the map from your current location to
your starting point.

Stopping Navigation

Select MODE > gPS > Stop
Navigation.

Viewing gPS Information

1
Select MODE > gPS > Satellites.
The satellite strength information
appears. The black bars represent
the strength of each satellite signal
received (the number of the satellite
appears below each bar).
2
Select ▲ or ▼ to view the satellite
page.
The satellite page displays information
about the GPS signals the Forerunner
is currently receiving.
For more information about GPS, go to
www.garmin.com/aboutGPS.
34), it may take
33