Communication Ports; Fiber Optic Ports - Siemens RUGGEDCOM RMC20 Installation Manual

RUGGEDCOM RMC20
Installation Guide

Communication Ports

The RMC20 can be equipped with various types of communication ports to enhance its abilities and performance.
To determine which ports are equipped on the device, refer to the factory data file available through . For more
information on how to access the factory data file, refer to the User Guide for the RMC20.
Each communication port type has a specific place in the RMC20 chassis.
Figure 10: Port Assignment
1. Port 1 2. Port 2
Port
1
2
The following sections describe the available ports:
• Section 3.1, "Fiber Optic Ports"
• Section 3.2, "Serial Terminal"
Section 3.1

Fiber Optic Ports

Fiber optic ports are available with ST (Straight Tip) connectors. Make sure the Transmit (Tx) and Receive (Rx)
connections of each port are properly connected and matched to establish a proper link.
Fiber Optic Ports
Type
RS232/RS485/RS422 Serial Terminal
Multi-Mode Fiber Optic Port
Communication Ports
1
2
Chapter 3
13