Furuno CSH-53 Operator's Manual page 40

5-2
2. Operate the arrow keys in sub panel 1 to select a menu. As
you move through the menu, each item, initially shown as
blue on gray, universes to gray on blue to show selection.
For example, select the HIST DSP/GRPH menu.
3. Press the MENU key to display menu selected.
USER MENU HIST DSP/GRPH
Select item with dc[ \ keys and press MENU key.
Press END key to close menu.
HIST Window DSP
Fish Histogram
Figure 5-2 HIST DSP/GRPH menu
4. Operate the up and down arrow keys in sub panel 1 to select
menu item, and the right and left arrow keys to select op-
tion.
5. Press the END key to close the menu. Press the key again to
display picture.
Note: The HELP key provides menu operating information.
Menu screen location and display mode
Menu screen location depends on display mode as shown in the
figure below.
Menu
Normal Mode
Figure 5-3 Menu screen location and display mode
AUDIO PRT/STBD
ON OFF
ES Mode
H-Slice
Menu