Furuno CH-270 Operator's Manual page 116

SPECIFICATIONS
3.5 Horizontal Mode Control
Range (m) 10 20
Norm 11 11
Time
(sec)
Fast 11 11
3.6 Vertical Scan Mode Control
4. I/O INTERFACE
4.1 Data Format
4.2 Input
4.3 Output
5. POWER SUPPLY
5.1 Transceiver Unit
5.2 Hull Unit
5.3 Rectifier
6. ENVIRONMENTAL CONDITIONS
6.1 Ambient Temperature
6.2 Relative Humidity
6.3 Waterproofing
7. COATING COLOR
7.1 Display Unit/ Control Unit
7.2 Transceiver Unit
SP-2
Scanning Angle:
Scanning Center:
Scanning Step Angle: Normal: 6°, High speed: 12°
Elevation Angle:
Time to Train Full Circle:
40 60 80 100
11 11 11 11
11 11 11 11
Scanning Angle:
Scanning Center:
Scanning Step Angle: Normal: 3°, High speed: 6°
Time to Train:
Transceiver Beam Width: 8° (at 3dB/full circle).
IEC 61162-1 (NMEA 0183 Ver 1.5/2.0)
DBS, DBT, DPT, GGA, GLL, HDG, HDM, HDT, MDA,
MTW, RMA, RMC, VDR, VHW, VTG
TLL
12-32 VDC: 4.7-1.8 A
12/24 VDC: 4.0/2.5 A
Max. 10/6 A
100-115/220-230 VAC, 1 phase, 50/60 Hz
Transceiver unit: -15°C to +55°C
Soundome: 0°C to +35°C
Hull unit: 0°C to 45°C
95%
Display/ Control unit: IPX5 (IEC 60529)
Hull unit: IPX2
Transceiver unit: IPX0
Panel: N3.0, Chassis: 2.5GY5/1.5
2.5GY5/1.5
6° to 360°, 24° step
6° steps, 360° setting available
+5° to 90°, 1° step
120 160 200 250
11 14 17 21
11 13 14 16
6° to 180°, 12° step
0° to 180°, 6° step
360°, 6° step
10° (at 6dB/full circle)
300 400 500 600
25 33 41 49
18 22 26 30
800
65
38