Trail Color Shift - Furuno FAR-2107 Series Operator's Manual

1.3

Trail Color Shift

When there are many trails on the screen, especially when using long trails, it is diffi-
cult to distinguish past tracks from current tracks since they are the same color. With
the trail color shift feature, tracks are painted in a different color from the point when
color shift is activated. For example, the current track color is 1: FUCHSIA. Then, at
the moment the trail color shift is made active, trails from that point will be painted in
2: MAROON.
Target
Target
Fuchsia color
displayed up to
this point
Note: At the moment the trail color shift is activated, the trail colors in effect after the
time set in the TRAIL MODE box are erased. For example, the trail length is 12
HOURS and the time set in the TRAIL MODE box is 05:00. Then, using the illustration
above as an example, 6: LIME will not be shown.
2 TRAIL GRAD in the TRAIL menu must be set to SINGLE and 8 TRAIL LENGTH to
other than NORMAL in order to activate the trail color shift feature.
1. Right-click the TRAIL MODE box.
2. Select 0 [TRAIL COLOR] then push the left button.
[TRAIL COLOR]
1 BACK
2 COLOR SHIFT
NO/YES
3 TRAIL COLOR
10: CYAN
11: BLUE
12: NAVY
3. Select 2 COLOR SHIFT then push the left button.
4. Select YES then push the left button.
5. Push the right button twice to close the menu.
Echo trail
1:FUCHSIA 2:MAROON 3:RED 4:PPL
2:MAROON 3:RED
1: FUCHSIA
2: MAROON
3: RED
4: PURPLE
5: YELLOW
6: LIME
7: GREEN
8: OLIVE
9: TEAL
5:YEL
4:PPL 5:YEL 6:LIME
4
Trail color before shift
Trail color after shift