Loading The Tender - Meridian SEED EXPRESS Bulk Seed Tender Operator's Manual

Operator's Manual: 240 FF Basic Seed Express
UPENDING HAZARD
Tender must be connected to
tow vehicle at all times during operation
to avoid tipping backwards.
UPENDING HAZARD
Load compartment 1 (closest to hitch)
first to keep weight on the hitch.
Unload compartment 2 first
to keep weight on the hitch.
1. Connect the seed tender to a tow vehicle of
sufficient size to safely transport it.
2. Before loading the seed tender:
- Make sure the two slide gates are fully
closed. Gate stops must be in locked
position.
- Be sure the sample slide gate are closed.
3. Open the roll tarp.
4. Fill the front compartment first to maintain a
positive tongue weight.
5. Fill the rear compartment.
6. Close the roll-up tarp and store the crank
handle in the holder.
Note:
There are sample slide gates,
in each compartment,
to retrieve samples.
3-12
Bulk Seed Tender
™

3.7 LOADING THE TENDER

®
Fig 26 - Compartment slide gates
Fig 27 - Sample slide gates
Fig 28 - Close tarp, store handle
Revised 01.2022
®