Loading / Unloading; Loading (Filling The Seed Tender) - Meridian Seed Express 840 Operator's Manual

2. Open the tarp by pressing and holding the
toggle switch. The tarp will stop when fully
open, or may be stopped in any intermediate
position by releasing the switch.
3. The tarp may be opened from the wireless
remote by pressing SELECT, then pressing
and holding the OPEN button.
Note: The power switch on the control panel
must be in the ON position in order for the
remote control to function.
4. Close the tarp by pressing and holding the
CLOSE switch on the control panel or the
CLOSE button on the remote control.

7.3 LOADING / UNLOADING

7.3.1 Loading (Filling the Seed
Tender)
This Operation section provides a step-by-step
procedure for fi rst loading seed into the seed
tender compartments It then shows how to unload
the tender into a storage bin or other equipment.
1. Connect the seed tender to a semi tractor
to safely transport the unit to its desired
destination.
SAFETY
INSTRUCTIONS
To prevent possible injury, do not load the seed
tender unless it is securely fastened to a tractor.
WARNING
Pinch Point Hazard.
Do not reach into the slide gate area for
any reason unless the gasoline engine is
off and the ignition key removed. Serious injury
will result if the gate is activated while any body
part is in the opening. Refer to "2. Safety" on
page 12.
2. Position the tender to fi ll the desired
compartment.
35