Components And Controls - Meridian SEED EXPRESS Bulk Seed Tender Operator's Manual

Operator's Manual: 240 FF Basic Seed Express
Before starting to work, all operators should
familiarize themselves with the location and
function of the components and controls.
Options and their locations may vary.
Gas Engine:
Read the engine manufacturer's manual for
more detailed instructions.
a. Engine Ignition Key Switch:
Insert the key to operate.
b. Throttle Lever:
Move the lever laterally to increase or
decrease the RPM.
c. Choke Lever:
Choke the valve for starting when the engine
is cold. Open the choke as the engine warms.
IMPORTANT:
Always run at maximum engine speed.
d. Fuel Shut-Off Valve:
Slide the lever toward engine to open.
- ALWAYS close the valve when not in use
or before transporting.
e. Starting Rope:
Grasp the T-handle firmly and pull the rope
sharply to start the engine.
- The ignition key on must be ON to pull-start.
Battery (12 Volt):
A 12 Volt battery supplies the power to start the
engine. When the engine is operating a trickle
charge is sent to the battery to keep it fully
charged.
Revised 01.2022
Bulk Seed Tender
™

3.2 COMPONENTS AND CONTROLS

®
b
c
d
e
Fig 6 - Gas engine
Fig 7 - Hydraulic reservoir and filter
Hydraulic Oil Reservoir and Filter:
The oil reservoir and filter are positioned on the
right-side of the hopper. Use ISO grade 32 fluid
(AW HVI or comparable).
• Oil Reservoir holds 10 US Gallon (37.8 Liters)
®
a
3-3