Dgps Setting - Furuno GP-1850W Installation Manual

3.4

DGPS Setting

When external GPS beacon receiver (output: RS-232C only) is connected or the DGPS
beacon receiver is incorporated, set the DGPS mode referring to the following procedure.
1. Press the [MENU] key.
2. Press the GPS/DGPS/TD OPTIONS soft key.
3. Press the DGPS/WAAS SETUP OPTIONS soft key.
4. Select DGPS/WAAS MODE and press the EDIT soft key.
5. Select DGPS or AUTO and press the ENTER soft key.
WAAS: WAAS data can be received.
AUTO: DGPS, WAAS or GPS data can be automatically received, The order of priority is
DGPS, WAAS and GPS.
Note: If the external DGPS beacon receiver GR-80 is connected to the GP-1850W, refer to
the interconnection diagram below.
Connection with GR-80
FORMAT
DGPS/WAAS MODE
BEACON FREQUENCY
BEACON BAUD RATE
WAAS SEARCH
CORRECTIONS DATA SET
DGPS/WAAS ALARM
DGPS 3D
DGPS/WAAS options window
GP-1850W
DGPS
> 1 >
> 2 >
> 3 >
RD
> 4 >
> 5 >
SD
> 6 >
SG
> 7 >
MJ-A7SPF0003-050 cable
DGPS
NMEA 0183
WAAS
OFF
VER 1.5
AUTO
AUTO
AUTO
02
ON
RETURN
GR-80
DATA
(Set RS-232C)
< 1 < TD-B
YEL
< 3 < RD-B
RED
< 7 < GND
BLU
(option)
3. INITIAL SETTINGS
EDIT
13