Alarm Setup - Furuno SC-110 Operator's Manual

2. OPERATION
2.5

Alarm Setup

The SC-110 can alert you with audible and visual alarms when GPS signal,
DPGS signal and WAAS signal are lost. To set the DGPS alarm, do the
following:
1. Press the [MENU] key to show the menu.
2. Choose ALARMS and then press the [ENT] key.
3. BUZZER is selected; press the [ENT] key.
4. Use ▲ or ▼ to choose buzzer type desired and then press the [ENT] key.
SHORT:
LONG:
CONSTANT: Continuous beep
5. Press the [ENT] key.
6. DPGS is selected; press the [ENT] key.
7. Use ▲ or ▼ to choose OFF or ON as appropriate.
8. Press the [ENT] key.
9. Press the [DISP] key to close the menu.
2-6
ALARMS
BUZZER :
DGPS : OFF
Alarm menu
SHORT
LONG
CONSTANT
Buzzer options
Two short beeps
Three long beeps
OFF
DGPS alarm options
LONG
ON