Product Operation - Carrier RMAP-ST User Manual

Normal Operation
Note
Press the
1
►
The previously selected operation mode will
be displayed.
Press the
2
button on Remote Control) to select your desired fan speed.
►
You can adjust the fan speed from level 1 (F1) to
level 18 (F18).
Note: The default home display on Wi-Fi models will show a
Smart Auto Operation
Smart Auto Mode allows the system to determine
1
the fan speed depending on the air quality of the
room. Press the
►
The previously selected operation mode will
be displayed.
Press the "
2
Remote Control)to select Auto mode.
►
Each time the button is pressed, it switches
between Auto Operation and Normal Operation.
Note
12
AIR PURIFIER
When the air purifier turns on, the sensor is initialized and the display
shows during initialization, and the LED light sensor will change
colors.
button to turn on.
button on the control panel (or
PM2.5 reading. Once the
display will switch to show designated fan speed.
button to turn on.
" button (or
Auto Auto
• The fan speed cannot be adjusted during Auto Operation.
• In Auto mode, the Indoor Air Quality Monitor detects the indoor air
quality and the device automatically adjusts the fan speed to filter the
air accordingly.
+
button is pushed, the
button on the