Furuno LCD DISPLAY MU-155C Operator's Manual page 15

Menu item
H_SIZE***
V_SIZE***
PHASE
CONTRAST
H_POSITION
V_POSITION
R_LEVEL
G_LEVEL
B_LEVEL
TEMPERATURE
B STRETCH
W STRETCH
DISP MODE
SHARPNESS
*: Warm color← 5500K, 6500K, 7000K, 8000K → Cold color
**: Select NORMAL to use the SXGA signal from a radar or scanning sonar. Note that both left
and right edges may be in black. For VGA and XGA signals, FULL and NORMAL are
available.
***: Adjust H_SIZE and V_SIZE properly. Otherwise, unwanted image may appear outside of the
display area.
Note: When the characters are not clear, adjust PHASE and SHARPNESS.
Function
Adjusts the image size horizontally.
Adjusts the image size vertically.
Adjusts the characters and graphic lines.
Increases or decrease contrast level.
Moves the image position horizontally.
Moves the image position vertically.
Adjusts red color level.
Adjusts green color level.
Adjusts blue color level.
Adjusts color temperature.
Reduces noise on black color.
Emphasizes white color.
Selects the signal resolution.
FULL: Shows the input signal on entire screen.
EVEN: Shows the input signal with original size.
NORMAL: Shows the input signal with same
aspect ratio.
Sharpens the edge horizontally.
8
Setting range
Variable depending on
signal type
1-32
1-64
1-50 (DVI), 1-99 (RGB1, 2)
1-40
1-64
1-64
1-64
5500K/6500K/7000K/8000K
OFF, 1-10
OFF, 1-10
FULL/EVEN/NORMAL**
1-10
*