Safety Measures To Be Adopted; Service Centre Procedures; Machine Registration; Interventions Under Warranty - Stiga MPV 320W Workshop Manual

WORKSHOP MANUAL
MPV 320W / 520W

1.2.4 Safety measures to be adopted

All the machines are manufactured in accordance with the strict European safety regulations in
force. To maintain these levels of safety in the longer term, the Service Centres should work to this
end by making appropriate checks every time there is the chance to do so.
In particular, every time there is work done on the machine the Service Centre should:
• check:
- that the safety microswitches function correctly;
- that the casings and protection covers have not been removed;
- that the labels with instructions or provisions have not been removed or have become illegible
(these form an integral part of the safety system).
• and also:
- restore to proper working order any safety devices which have been manipulated or removed;
- reassemble inefficient, damaged or missing casings and protection covers;
- replace illegible labels;
- not endorse any repair or modification on the machine or the engine which results in a change in
performance or use that is incorrect or different from the purpose for which it was designed and
approved;
- warn the Customer that failure to comply with the above points automatically voids the warranty
and the responsibility of the Manufacturer.

1.3.1 Machine registration

The Warranty registration card must be completed, signed and returned at the time of purchase.
This activates the warranty card.
Claims that meet the requirements will be honoured during the limited warranty period.

1.3.2 Interventions under Warranty

The Manufacturer acknowledges the interventions performed under warranty as per the terms,
procedures and limits stated in the contract.
As far as the engine and the transmission unit are concerned, the conditions provided by their
respective Manufacturers apply.

1.3.3 Exceptions to the use of the Warranty

• The warranty does not cover damages caused by:
- Lack of knowledge and familiarisation of the accompanying documentation on the part of the
user.
- Carelessness.
- Incorrect or prohibited use or assembly.
- Use of non-genuine spare parts.
- Use of accessories not supplied or approved by the manufacturer.
1 - INTRODUCTION

1.3 SERVICE CENTRE PROCEDURES

Chapter EDITION PAGE
2017 6 /
64