Panasonic CS-HZ25XKE Operating Instructions Manual page 17

To maximise comfort while sleeping
• This operation provides you with a comfortable environment while sleeping. It will automatically
adjust the sleep pattern temperature during the activation period.
• The indoor unit indicator will dim when this operation is activated. This is not applicable if the
indicator brightness has been manually dimmed.
• This operation is incorporated with the activation timer (0.5, 1, 2, 3, 4, 5, 6, 7, 8 or 9 hours).
• This operation can be set together with timer. Sleep operation has the priority over OFF timer.
• This operation can be cancelled by pressing the respective button until the sleep timer reaches 0.0h.
To enjoy fresher and cleaner environment
• This operation provides cleaner air, moisturises your skin and hair, and deodorises odours
in the room.
• Press nanoe™X to activate this operation, either when the unit is ON or OFF. During
nanoe™X individual operation, the fan speed will follow the remote control setting.
• If nanoe™X is activated before the unit is turned off, the nanoe™X operation will resume
when the unit is turned on. This includes when TIMER ON is set.
• Press the button again to cancel.
To set the timer
You can set the timer to turn on and off the unit at 2 different preset time.
1 2
1 Select TIMER ON or
TIMER OFF.
• Each time pressed:
(exit setting)
2 Set the time.
3 Confi rm the setting.
Note
, ,
• Can be selected at the same time.
• Can be activated in all modes.
3
Example:
OFF at 22:00
• To cancel the timer, press
select the respective setting
press .
• If the timer has been cancelled manually or
due to power failure, you can restore the
timer again. Press
the respective setting
.
• The nearest timer setting is displayed and
will activate in sequence.
• The timer operation follows the clock
setting on the remote control and will
repeat daily when timer has been set. For
clock setting, refer to Quick Guide.
, ,
• Cannot be selected at the same time.
or to
or , then
or to select
or , then press
17