Table of Contents
Advertisement
Connecting the power cord
Using the supplied power cord, con-
nect the [AC IN] connector on the
rear panel of the main unit and the
AC outlet.
<Note>:
Use only the supplied
power cord.
Turning on the power
Press down the [POWER] switch on
the rear panel of the main unit to
turn on the power.
To turn on or off the LM16 and peripheral devices which are connected to the LM16,
follow the proper procedures described below.
Procedures of turning on the power after connecting peripheral devices
<Note>:
Before turning on or off the LM16 and peripheral devices which are connected
to the LM16, make sure that the channel faders and monitor gain control of the LM16, as
well as the volume control of an monitor amplifier (or powered monitor speaker), are set
to minimum. Otherwise, a loud sound may be produced suddenly that may damage the
speaker or your hearing.
(1)
Turn on the devices connected to the [INPUT] connectors to the LM16.
(2)
Turn on the LM16.
(3)
Turn on the monitor amplifier (or powered monitor speaker).
Procedures of turning off the power after connecting peripheral devices
(1)
Turn off the monitor amplifier (or powered monitor speaker).
(2)
Turn off the LM16.
(3)
Turn off the devices connected to the [INPUT] connectors to the LM16.
Preparation of power supply
AUX SEND (-2dBu)
MIDI OUT
EFF SEND (-2dBu)
MIDI OUT
USB
15
Model LM16 [Before using the unit]
INPUT
INSERT
INSERT
INSERT
INSERT
INSERT
INSERT
CONTROLLER
PHANTOM
POWER
INPUT
AUX SEND (-2dBu)
INSERT
INSERT
INSERT
INSERT
CONTROLLER
PHANTOM
[POWER] switch
INSERT
INSERT
AC outlet
INSERT
INSERT
INSERT
INSERT
POWER
Advertisement
Table of Contents
