Maytag MGR8800FZ Control Manual page 2

KEYPAD FEATURE
CONVECT BAKE Convection
cooking
CONVECT ROAST Convection
cooking
CONVECT BROIL Convection
cooking
KEEP WARM Hold warm
DELAY START Delayed start
COOK TIME Timed
cooking
POWER PREHEAT Rapid oven
preheating
WARMING DRAWER Warming
ON/OFF drawer (on
some models)
AQUALIFT Clean cycle
SELF CLEAN
CONTROL LOCK Oven control
hold 3 sec. to lock lockout
SETTINGS Oven use
functions
INSTRUCTIONS
1. Press CONVECT BAKE.
2. Press the number keypads to set a temperature other than 350°F (177°C) between
170°F and 500°F (77°C and 260°C).
3. Press START.
4. To change the temperature, repeat steps 1 and 2. Press START or wait 5 seconds for
the change to take effect.
5. Press CANCEL when finished.
1. Press CONVECT ROAST.
2. Press the number keypads to set a temperature other than 375°F (191°C) between
170°F and 500°F (77°C and 260°C).
3. Press START.
4. To change the temperature, repeat steps 1 and 2. Press START or wait 5 seconds for
the change to take effect.
5. Press CANCEL when finished.
1. Press CONVECT BROIL.
2. Press the number keypads to set a temperature other than 475°F (246°C) between
170°F and 500°F (77°C and 260°C).
3. Press START.
4. To change the temperature, repeat steps 1 and 2. Press START or wait 5 seconds for
the change to take effect.
5. Press CANCEL when finished.
Food must be at serving temperature before placing it in the warmed oven.
1. Press KEEP WARM.
2. Set temperature between 145°F (63°C) and 190°F (88°C) using the number keypads.
The default temperature is 170°F (75°C).
3. Press START.
4. Press CANCEL when finished.
The DELAY START keypad is used to enter the starting time for an oven function with a
delayed start.
Timed Cooking allows the oven to be set to turn on at a certain time of day, cook for a set
length of time, and/or shut off automatically. Delay start should not be used for foods such
as breads and cakes because they may not bake properly.
To set a Timed Cook or a Delayed Timed Cook, see "Cook Time" section.
Provides the fastest preheat time for the BAKE function.
1. Press POWER PREHEAT.
2. Press the number keypads in response to the scrolling text "Default is OFF for Bake;
Press 1 to turn ON".
3. Press BAKE.
4. Press START.
5. A reminder tone will sound when the preheat temperature is reached. Place food
inside the oven.
NOTE: This feature should only be used for one-rack baking. Unused racks should be
removed prior to Power Preheat. A standard rack should be used for Power Preheat.
If preheating for the Bake cycle has already started, Power Preheat may be started
directly by pressing POWER PREHEAT.
1. Press WARMING DRAWER to select the Warming Drawer function.
2. Press START to begin preheating the warming drawer.
3. Press WARMING DRAWER to turn off the heating element.
See the "Warming Drawer" section for more information.
See the "Clean Cycle" section in the Owner's Manual.
No keypads will function with the controls locked.
1. Check that the oven and the Kitchen Timer are off.
2. Press and hold CONTROL LOCK keypad for 3 seconds.
3. If enabled, a tone will sound, and "CONTROL LOCKED" will be displayed.
4. Repeat to unlock.
Enables you to personalize the audible tones and oven operation to suit your needs.
2