Power Wheels BARBIE KEEP BEACH RANGER 78478 Owner's Manual page 21

36
• Align the tabs on the inside of a light cover with the slots
in one of the light housings on the light rack. Make sure
the light covers are positioned with the wide spaced tabs
at the top.
• Push firmly on the light cover to snap it to the
light housing.
• Repeat this procedure on the other side of the light rack
to assemble the other light.
37
PUSH
HERE
Side
Fender
PULL HERE
• Fit the sport bar and sport bar support legs into the holes
in the vehicle body.
• Push down firmly on a sport bar side leg while pulling
up on the side fender to fit the sport bar into the
vehicle body.
• Repeat this procedure on the other side of the
vehicle body.
Assembly
Light Covers
Sport Bar
21
38
Rear
Wheel
Well
1 1 / " x 1 / "
2 4
Screw
• Insert a 1 1 / " x 1 / " machine screw into the hole closest to
2 4
the front of the vehicle in the underside of the rear wheel
well, through the vehicle body and into the end of the
sport bar.
• Tighten the screw with a Phillips screwdriver. Do not
over-tighten.
• Repeat this procedure on the other side of the
vehicle body.
39
Rear Bumper
Tabs
Lower Rail
• Face the rear of the vehicle.
• Fit the lower rail on the rear bumper over the rear
bumper support.
• Gently bend the tabs at the bottom of the rear bumper
under the vehicle.
Sport Bar
Rear Bumper
Support