Power Wheels BARBIE KEEP BEACH RANGER 78478 Owner's Manual page 14

10
Cap Nut
Bottom View
• Insert the end of the steering column through the hole in
the steering rod.
• Fit a cap nut onto the end of the steering column.
• While supporting the steering column, tap the cap nut
with a hammer to secure it on the steering column.
Helpful Hint: You may want the help of another adult to
support the steering column while you tap the cap nut with
the hammer.
11
Steering Wheel
Steering
Column
"UP"
• Turn the vehicle body upright.
• Position the steering wheel so that the spokes form a
"Y" as shown.
• Fit the steering wheel onto the steering column.
• Fit a cap nut onto the end of the steering column.
• Tap the cap nut with a hammer to secure it on the
steering column.
Helpful Hint: You may want the help of another adult to
support the steering column while you tap the cap nut
with the hammer.
Assembly
End of Steering Column
Steering Rod
Cap Nut
12
Steering Wheel
• Fit the steering wheel cap into the center of the steering
wheel with the screw holes aligned.
• Insert two #8 x 1" screws as shown.
• Tighten the screws with a Phillips screwdriver.
Do not over-tighten.
13
Wide Tab
Wide Notch
Lens Guard
• Fit the wide notch in the side of a headlight lens under
the wide tab on a lens guard.
• Press firmly on the inside of the headlight lens to snap it
into the lens guard.
• Repeat this procedure to assemble the other headlight
lens to the remaining lens guard.
14
Steering
Wheel
Cap
Headlight
Lens