Power Wheels BARBIE KEEP BEACH RANGER 78478 Owner's Manual page 16

18
• Fit the screw pegs on the windshield brackets into the
holes in the top surface of the dash. Press firmly to fit the
lip on each windshield bracket into the slot in the top of
the dash.
• Insert two #8 x 1" screws into each windshield bracket.
• Tighten the screws with a Phillips screwdriver. Do not
over-tighten.
19
Slots
Tabs
• Align the slots in the front half of the windshield frame
with the tabs on the windshield brackets.
• Fit the front half of the windshield frame onto the
windshield brackets as shown.
Windshield
Brackets
Lip of
Bracket
Slot
Windshield Frame -
Front Half
Assembly
20
Windshield Frame -
Front Half
• Rotate the front half of the windshield frame down so it
lays flat on the vehicle body.
• Working from the center of the vehicle, insert a hinge pin
through the holes in the windshield frame and the holes
in the windshield bracket, as shown.
• Repeat this procedure to secure the front half of the
windshield frame to the other windshield bracket.
21
Slots
Windshield Frame –
Front Half
• Fit the back half of the windshield frame onto the front
half of the windshield frame. Make sure the slots at the
bottom of the two windshield frame halves are aligned.
• Insert ten #8 x 1
windshield frame.
• Tighten the screws with a Phillips screwdriver. Do not
over-tighten.
Helpful Hint: Squeeze the two windshield halves
together while tightening the screws.
16
• Lift the assembled windshield to the raised position.
Hinge Pin
Windshield Frame – Back Half
1 / " screws into the back half of the
4
Windshield
Bracket