Viewing Nexrad Weather Radar; Flying Activity; Setting The Auto Fly Value; Starting A Flight - Garmin D2 MACH 1 Owner's Manual

Viewing NEXRAD Weather Radar

Before you can view NEXRAD weather radar, you must pair your device with your smartphone
Phone, page 88).
You can view the weather radar image associated with your current location.
NOTE: You can customize the NEXRAD Tiles option in the Aviation settings to download additional weather
radar images based on a direction from your current location
1 At any time, hold DOWN and START at the same time.
The device downloads a square of radar data for your current GPS position, outlined in magenta. The radar
data is active for 5 minutes.
NOTE: If you are near the border of the square, you may not see all applicable radar data.
2 If necessary, hold DOWN and START to download new data.

Flying Activity

A flying activity starts automatically when your detected climb rate exceeds the value you set in the auto fly
settings. The default auto fly value is 500 fpm.

Setting the Auto Fly Value

1 Hold MENU.
2 Select Activities & Apps > Fly.
3 Select the activity settings.
4 Select Auto Fly.
5 Select the auto fly value.
A flying activity starts automatically when your detected climb rate exceeds this value.

Starting a Flight

1 From the watch face, press START.
2 Select Fly.
3 Go outside and wait while the watch locates satellites.
4 Press START to start the flight timer.
NOTE: Your activity data is recorded only while the flight timer is running.
5 Start your activity.
6 After you complete your activity, press STOP, and select Save.
6
(Aviation Settings, page 109).
(Pairing Your
Flying