Table of Contents
Advertisement
Available languages
Available languages
CODE
J.Ed
Enhanced Debit is self-selected when a Generation 2 card reader
is installed in the washer. The Ed option cannot be manually
selected or deselected.
g
Press the MIXED keypad once to advance to next code
PRICE SUPPRESSION OPTION*
L.00
This option causes the customer display to show 'ADD' or
'AVAILABLE' rather than the amount of money to add. (Used
mainly in debit installations.)
L.00
Not Selected 'OFF'.
L.PS
Selected 'ON'. Press the DELICATES keypad once for this
selection.
g
Press the MIXED keypad once to advance to next code
n. CE
CLEAR ESCROW OPTION*
When selected, money held in escrow for 30 minutes without
further escrow or cycle activity will be cleared.
n. CE
Selected 'ON'.
n. 00
Not selected 'OFF'. Press the DELICATES keypad once to
deselect this selection.
g
Press the MIXED keypad once to advance to next code.
A3.03
MIXED Cycle Settings*. Allows the owner to select the cycle
default options of Water Temperature, Soil Level, and Extra
Rinse. See Table 1 for specific settings. MIXED is set to 03 from
the factory.
g
Press the MIXED keypad once to advance to next code.
A4.01
DELICATES Cycle Settings*. Allows the owner to select the
cycle default options of Water Temperature, Soil Level, and Extra
Rinse. See Table 1 for specific settings. Delicates is set to 01
from the factory.
g
Press the MIXED keypad once to advance to next code.
A5.1C
HEAVY DUTY Cycle Settings*. Allows the owner to select the
cycle default options of Water Temperature, Soil Level, and Extra
Rinse. See Table 1 for specific settings. HEAVY DUTY is set to
1C from the factory.
g
Press the MIXED keypad once to advance to next code.
Table 1
A3, A4,
Extra
Soil Level
Water
A5, A6
Rinse
(Heavy-On,
Temp
Normal-Off)
00
Off
Off
Tap
Cold
01
Off
Off
Cold
02
Off
Off
Cool
03
Off
Off
Warm
04
Off
Off
Hot
08
Off
On
Tap
Cold
09
Off
On
Cold
A
Off
On
Cool
B
Off
On
Warm
C
Off
On
Hot
EXPLANATION
.
.
A3, A4,
Extra
Soil Level
A5, A6
Rinse
(Heavy-On,
Normal-Off)
10
On
Off
11
On
Off
12
On
Off
13
On
Off
14
On
Off
18
On
On
19
On
On
1A
On
On
1B
On
On
1C
On
On
CODE
A6.03
NORMAL ECO Cycle Settings*. Allows the owner to select the cycle
default options of Water Temperature, Soil Level, and Extra Rinse.
See Table 1 for specific settings. Normal Eco is set to 03 from the
factory.
g
Press the MIXED keypad once to advance to next code.
F0
WIFI MENU - Access Wifi Menu by pressing the HEAVY DUTY
button while on the "F0" screen. The Wifi Menu allows you to see
wifi connection status as well as Wifi setup options. See the Wifi
Menu section for more information.
g
Press the MIXED keypad once to advance to next code.
Wi-Fi MENU
Pressing the HEAVY DUTY key while on the F0 screen enters into
the Wi-Fi mode. To advance through the Wi-Fi sub menu, use
the MIXED key. The DELICATES key is the Select key. Press the
HEAVY DUTY keypad at any time to exit Wi-Fi Menu.
CODE
F0.En
Wi-Fi Enable/Disable option. This is either selected Enabled or
Disabled.
F0.dS
Wi-Fi disabled. Press the DELICATES key 3 times to disable Wi-Fi.
F0.En
Wi-Fi Enabled. Press the DELICATES key 3 times to enable Wi-Fi.
g
Press the MIXED key once to advance to next code.
F1.dS
Connection Status Mode (Status only) allows user to see machine's
current Wi-Fi connection status.
F1.dS
(Status) This will be displayed if machine is not connected to router.
F1.Cr
(Status) This will be displayed if machine is connected to router but
NOT connected with Whirlpool server.
F1.CS
(Status) This will be displayed if machine is connected to router
AND connected with Whirlpool server.
g
Press the MIXED key once to advance to next code.
F2.En
uAP Setup Mode allows machine to connect to Wi-Fi via uAP.
F2.En
This will be displayed if uAP provisioning is enabled and machine is
currently not connected to the router or Whirlpool server (default).
F2.dS
This will be displayed if uAP provisioning is disabled and machine is
currently not connected to the router or Whirlpool server. In order to
disable setup via uAP press the DELICATES key 3 times.
Water
F2.Cr
(Status) This will be displayed if machine is connected to router but
Temp
NOT connected with Whirlpool server.
Tap
F2.CS
(Status) This will be displayed if machine is connected to router
Cold
AND connected with Whirlpool server.
Cold
g
Press the MIXED key once to advance to next code.
Cool
F3.dS
WPS Setup Mode allows machine to connect to Wi-Fi via WPS.
Warm
F3.dS
This will be displayed if WPS provisioning is disabled and machine
Hot
is currently not connected to the router or Whirlpool server. This
will also be displayed if WPS connection not successful before the
Tap
Cold
WPS timer expired.
Cold
F3.En
This and WPS countdown timer will toggle on the display if WPS
provisioning is enabled and machine is currently searching for the
Cool
router.
Warm
F3.Cr
(Status) This will be displayed if machine is connected to router but
Hot
NOT connected with Whirlpool server.
F3.CS
(Status) This will be displayed if machine is connected to router
AND connected with Whirlpool server.
g
Press the MIXED key once to advance to next code.
EXPLANATION
EXPLANATION
13
Advertisement
Table of Contents
