Table of Contents
Advertisement
Available languages
Available languages
g
Open console, disconnect plug on J4, close console.
g
Plug in washer or reconnect power.
The washer is now in the set-up mode.
Before proceeding, it is worth noting that, despite all of the
options available, an owner can simply choose to uncrate a new
commercial washer, hook it up, plug it in, and have a unit that
operates.
Set-Up Codes
FOR NON-COIN MODELS: The set-up codes are the same as for
the 'COIN' models except where noted.
The set-up code is indicated by the one or two left-hand
characters. The set-up code value is indicated by the two
or three right-hand characters.
NOTE: Set-up codes marked with * are able to transfer from one
machine to another machine (must be same model type) via USB
stick.
CODE
6.08
Amount to Start for MIXED Cycle*. Represents the number of
MIXED
Coins or Debit pulses required to start the cycle. See Value of
Coin 1. Adjustable from 0 to 200.
g
Press the MIXED keypad once to advance to next code.
6.07
Amount to Start for DELICATES Cycle*. Represents the number
DELICATES
of Coins or Debit pulses required to start the base cycle. See
Value of Coin 1. Adjustable from 0 to 200.
g
Press the MIXED keypad once to advance to next code.
6.07
Amount to Start for HEAVY DUTY Cycle*. Represents the
HEAVY
number of Coins or Debit pulses required to start the cycle. See
Value of Coin 1. Adjustable from 0 to 200.
DUTY
g
Press the MIXED keypad once to advance to next code.
6.07
Amount to Start for NORMAL ECO Cycle*. Represents the
NORMAL ECO
number of Coins or Debit pulses required to start the base cycle.
See Value of Coin 1. Adjustable from 0 to 200.
g
Press the MIXED keypad once to advance to next code.
7.00
ADDITIONAL WASH TIME*
7.00
This is the number of minutes that can be added to a Wash
Cycle. Choose from 00-05 minutes by pressing the HEAVY DUTY
keypad.
g
Press the MIXED keypad once to advance to next code
8.00
ADDITIONAL RINSE TIME*
8.00
This is the number of minutes that can be added to a Rinse
Cycle. Choose from 00-05 minutes by pressing the HEAVY DUTY
keypad.
g
Press the MIXED keypad once to advance to next code.
9.00
CYCLE COUNTER OPTION*
This option is either SELECTED 'ON' or NOT SELECTED 'OFF'.
9.00
Not Selected 'OFF'.
9.0C
Selected 'ON' and not able to be deselected.
Press the DELICATES keypad 3 consecutive times to select
'ON'. Once selected 'ON' it cannot be deselected.
g
Press the MIXED keypad once to advance to next code
1.00
MONEY COUNTER OPTION*
This option is either SELECTED 'ON' or NOT SELECTED 'OFF'.
1.00
Not Selected 'OFF'.
1.0C
Selected 'ON'.
Press the DELICATES keypad 3 consecutive times to select
'ON' and 3 consecutive times to remove (Not Selected 'OFF'.)
Counter resets by going from 'OFF' to 'ON'.
12
EXPLANATION
.
.
CODE
1.C0
Selected 'ON' and not able to be deselected.
To select 'ON' and not able to be deselected, first select 'ON',
then within 2 seconds press the DELICATES keypad twice,
the HEAVY DUTY keypad once, and exit the set-up mode.
g
Press the MIXED keypad once to advance to next code
SCREEN TO ENTER HELP MODE SUB-MENU
2.00
2.00
Enter into sub-menu by pressing the HEAVY DUTY keypad. Exit
the sub-menu by pressing the HEAVY DUTY keypad.
g
Press the MIXED keypad once to advance to next code
VAULT VIEWING OPTION*
A.00
This option is either SELECTED 'ON' or NOT SELECTED 'OFF'.
A.00
Not Selected 'OFF'.
A.SC
Selected 'ON'. Press the DELICATES keypad once for this
selection. When selected, the money and/or cycle counts will be
viewable (depending on what is selected) when the coin box is
removed.
g
Press the MIXED keypad once to advance to next code
b.05
VALUE OF COIN 1*
b.05
This represents the value of coin 1 in number of nickels:
05 = $0.25.
By pressing the HEAVY DUTY or TEMPERATURE keypad, there
is the option of between 1 and 199 nickels.
g
Press the MIXED keypad once to advance to next code
VALUE OF COIN 2*
C.20
C.20
This represents the value of coin 2 in number of nickels:
20 = $1.00.
PR MODELS ONLY: Factory preset for $0.25.
By pressing the HEAVY DUTY or TEMPERATURE keypad, there
is the option of between 1 and 199 nickels.
g
Press the MIXED keypad once to advance to next code
d.00
COIN SLIDE OPTION
This option is either SELECTED 'ON' or NOT SELECTED 'OFF'.
d.00
Not Selected 'OFF'.
d.CS
Selected 'ON'. Press the DELICATES keypad 3 consecutive
times for this selection. When coin slide mode is selected,
set 'b.' equal to value of slide in nickels. Set Step 6 (regular
cycle price) and Step 3 (special cycle price) to number of slide
operations. If the installer sets up 'CS' on a coin drop model, it
will not register coins.
g
Press the MIXED keypad once to advance to next code
E.00
ADD COINS OPTION*
This option is either SELECTED 'ON' or NOT SELECTED 'OFF'.
This option causes the customer display to show the number of
coins (coin 1) to enter, rather than the dollars-and-cents amount.
E.00
Not Selected 'OFF'.
E.AC
Selected 'ON'. Press the DELICATES keypad 3 consecutive
times for this selection.
g
Press the MIXED keypad once to advance to next code
J.Cd
COIN/DEBIT OPTION*
J.Cd
Both coin & debit selected.
J.C_
Coins selected, debit disabled. Press the DELICATES keypad
3 times for this selection.
J._d
Debit Card selected, coins disabled. Press the DELICATES
keypad 3 times for this selection.
EXPLANATION
.
.
.
.
.
.
.
Advertisement
Table of Contents
