CW-C4000 Series
User's Guide
❏ Do not cut (stop at the print end position)
Notification
❏ None (Initial setting)
❏ Beep at Cut
❏ Beep at Job End
❏ Beep at Collate End
Note
Regardless of the printer driver setting described above, the buzzer will not sound if the buzzer setting
of the printer is disabled.
Pause
❏ None (Initial setting)
❏ Pause at Cut
❏ Pause at Job End
❏ Pause at Collate End
Media Detection...
The initial setting of [Media Source] and [Media Detection] will change depending on the settings of the printer.
Media Source
❏ Supply from Inside (Roll Paper)
❏ Supply from Outside (Fanfold Paper)
❏ Supply from Outside (Roll Paper)
Media Detection
❏ Gap detection
❏ Black mark detection
❏ No detection
Basic Operation
39