Paper Types - Epson CW-C4000 Series User Manual

CW-C4000 Series User's Guide
Forms of paper
Die-cut label
*1
without black marks
Wristband paper
*1
without black marks
*1: The print position is detected based on the black marks printed on the back of the paper.
*2: The print position is detected based on the gaps between labels.
Note
❏
❏

Paper Types

Supported paper types vary depending on the type of black ink as shown below.
Paper Type
Plain paper
Matte paper
Texture Paper
Synthetic
Wristband paper
Glossy paper
Glossy Film
High Glossy Paper
Before use
Paper shapes
Fanfold paper
Roll paper
When labels less than 10 mm in length are cut automatically, the printed label may adhere to the
cutter blade and become difficult to remove.
Depending on shape, thickness, and stiffness of die-cut labels, the labels may peel off their
backing paper inside the printer. When you want to use die-cut labels that do not meet the paper
specifications, contact qualified service personnel for advice.
When using Matte Ink
Paper Backing
width paper
(mm) width
(mm)
--- 50 to 112
Contact
qualified
service ---
personnel
for advice.
✓
✓
✓
✓
✓
-
-
-
16
Label Gap
width between
(mm) labels
(mm)
46 to 108 2.0 to 6.0
--- ---
When using Gloss Ink
-
✓
-
✓
-
✓
✓
✓