Metra Electronics Saddle Tramp BC-HDR-K4 Quick Start Manual page 2

1. Remove (4) T-27 Torx screws from the
inner fairing. (Figure A)
2. With a firm grip on the windshield,
remove (3) T-27 Torx screws, and then
remove the windshield. (Figure B)
Note: The outer fairing will also be
loosened.
3. Remove the outer fairing, unplugging
the headlight. (Figure C)
4. Remove (2) T-27 Torx screws to remove
the fairing vent, and then remove the
vent. (Figure D
Continued on next page
2
FAIRING DISASSEMBLY
(Figure A)
(Figure B)
(Figure C)
(Figure D)
386.257.1187
|
MetraOnline.com