Metra Electronics Saddle Tramp BC-HDR-K4 Quick Start Manual page 4

1. Secure the radio brackets to the radio
housing with (4) #8 x 3/8" Phillips screws
provided in this kit. (Figure A)
2. Slide the aftermarket radio into the radio
housing assembly and secure with screws
supplied with the radio. (Figure B)
3. Secure the radio housing assembly to the
bike using (4) 3/16" Allen screws previously
removed in step 8 of disassembly. (Figure C)
Continue to BC-HDR-K4 Interface Installation
4
KIT ASSEMBLY
(Figure A) (Figure B) (Figure C)
|
386.257.1187 MetraOnline.com