Table of Contents
Advertisement
5. Installation
(1) Insert a HDD (IDE) for Video Storage
The HDD should be set as MASTER.
( Normally the default setting of HDD is Master)
Notice: After the hard disk case is inserted into the hard disk tray, be sure to
Turn the tray key in lock position. Otherwise, hard disk will not be detected and
The System Loading procedure can not be completed.
(2) Connect cable for video/audio input and video/audio out,
The POWER LED lights if power is normal.
(3) Switch Power On
The detail connection is described in SYSTEM CONNECTION.
(4)
MENU
1.
2.
3.
4.
5.
6.
7.
8.
9.
(5)
INSTALLATION
Press MENU key to enter SET UP MENU.
Once inside the main menu you will find there are
nine set up pages as below:
CLOCK/LANGUAGE SETTING MENU
DAYLIGHT SAVE SETTING MENU
TIMER SETTING MENU
NORMAL RECORD SETTING MENU
ALARM RECORD SETTING MENU
BUZZER SETTING MENU
ARCHIVE SETTING MENU
RS232/RS485 SETTING MENU
SYSTEM SETTING MENU
Turn the jog dial clockwise or counterclockwise to change set up page.
12
Advertisement
Table of Contents
