Buzzer Setting Menu - EverFocus EDSR100H Instruction Manual

6.6 BUZZER SETTING MENU

BUZZER SETTING MENU
BUZZER
ALARM – IN
RECORD -IN
DISK FULL
VIDEO LOSS
TIMER
In BUZZER SETTING MENU, we SET the buzzer ON/OFF under the following conditions:
(1) BUZZER :
ENABLE: Turns the buzzer on.
DISABLE: Turns the buzzer off.
User can press Enter button to enable/disable in Record/Playback mode .
(2) ALARM – IN :
ON, the buzzer will sound when the alarm occurs.
(3) RECORD – IN:
ON, the buzzer will sound when Record-IN signal is applied on the Record-IN terminal.
(4) DISK FULL :
ON, the buzzer will sound when disk is near full 99.7%
(5) VIDEO LOSS :
ON, the buzzer will sound when the video loses.
(6) TIMER :
ON, the buzzer will sound when timer record occurs.
MENU
: ENABLE
: ON
: ON
: ON
: ON
: ON
Left/Right Button: Press
Up/Down Button: Press
25
or to move the cursor to the left or right
or to change the value.