EverFocus 410M Instruction Manual page 25

Quick Install Guide :
1. Unpack Everything
Make sure you have everything you need before you begin the installation.
2. Equipment Required
The following tools may help you to complete the installation:
•Drill
•Screwdrivers
•Wire cutters
3. Choosing the Location
Choose a location for installation that:
•Provides convenient access for installing or removing the hard drive
•Allows air to flow around the fan vents. Inadequate or improper air flow can impede proper operation of the unit
Avoid any location for installation:
•That is subject to high vibration
•That is subject to high sunlight levels
•That is subject to drenched of the rain
•Where passengers can interfere with unit
•Next to a heater duct
The following table lists the recommended location options.
Location
Bottom of glove box- horizontal mount
Bottom of passenger seat next to the driver
Underneath bulkhead-horizontal mount
Front of bulkhead-horizontal mount
Beside deriver seat-horizontal mount
Caution: Do not install the DVR on the floor or on the transmission access hatch. These locations have the highest levels of vibration and may
be subject to water damage.
Convenient operation Easy to install
Yes
NO
Yes
Yes
Yes
23
Low vibration
Yes
Yes
Yes Yes
NO
Yes
Yes
Yes
Yes
Yes
Good air flow
Yes
Yes
Yes
Yes
Yes