Epson TM-T60/T60P Operator's Manual page 41

ESC * m n1 n2 [d]k
Set bit image mode
< 1B >
k = n1 + 256 X n2 (m= 0, 1)
k = (n1 + 256 x n2) X 3 (m = 32, 33)
Sets the bit image mode using m and the number of dots
using n1 and n2.
Divide the number of dots to be printed by 256. The integer
l
. If the bit image data input exceeds the number of dots to
be printed on a line, the excess data is ignored.
. "d" indicates the bit image data. Set a corresponding bit to
1 to print a dot, otherwise set it to 0.
- The bit image modes selectable by m are as follows:
m
M o d e
8-dot
0 single-density
1
8-dot double-density 8
32 24-dot single-density 24
24-dot double-density
33
If m is out of range, n1 and the data following will be
l
processed as normal data.
After printing a bit image, the printer returns to the normal
l
data processing mode.
< 2A > < m >< n1 >< n2 >[< d >]k
H H
answer is n2 and the remainder is n1. Therefore, the
number of dots in the horizontal direction is: n1+256Xn2.
Vertical Direction
Number Dot
of Dots Density Density
8
24
- 3 4 -
Horizontal Direction
Dot
60
DPI 90 DPI
60 DPI 180 DPI
180 DPI 90 DPI
180 DPI 180 DPI
Maximum
Number of Dots
192
384
192
384