Epson TM-T60/T60P Operator's Manual page 14

TM-T60P/T80P
Connect the interface cable according to the following
Turn off the printer, power unit, and host computer.
Plug the interface cable connector into the interface connector on
the printer.
Squeeze the wire clips together until they lock in place on both
sides of the connector.
Attack the ground wire to the ground connector on the right side of
the interface connector.
Plug the drawer-kick cable connector into the drawer-kick connector
on the printer (if this connector is covered, you cannot attach a
drawer-kick cable to your printer).
- 6 -
procedure.