Table of Contents
Advertisement
6.) After the last track has played the player stops and the display shows the total
number of tracks on the disc. However the program sequence remains in the
memory.
Press the PROGRAM button, then the PLAY/PAUSE
programmed sequence again.
7.) To cancel the programmed sequence from the memory press the STOP
button while in programming mode.
The programmed sequence may also be canceled by removing the disc,
changing function to TAPE, RADIO, or shutting the system ' off' .
Program Repeat Playback
You can use the Program and Repeat features together to continuously repeat a
programmed sequence of tracks.
First, program the desired tracks according to Steps 1 through 5 on page 14.
When Programmed Playback begins press the REPEAT button twice to activate
the All Tracks Repeat feature.
The REPEAT Indicator lights and all the tracks
in your programmed sequence will be repeated
continuously.
To cancel Programmed Repeat Playback press the STOP
PROGRAM and REPEAT Indicators go ' Off' .
MS7622_031504.p65
16
16
button to play the
button until both the
15/3/2004, 11:54
Advertisement
Table of Contents
