Emerson MS3103 Owner's Manual page 26

Programmed Playback
This system has a 60 track programmable memory that allows you to program up
60 tracks on 3 discs for playback in any desired order.
NOTE: YOU CANNOT PROGRAM THE PLAYER WHILE A DISC IS PLAYING.
YOU MUST PRESS THE STOP
BEGINNING THE PROGRAM STEPS BELOW.
1.) Load up to 3 discs in the player
as usual. Close the CD door and
wait until the display shows the
total tracks and playing time of
the first disc.
2.) Press the TIME-SET/MEMORY
button to enter the Program
mode. The display will show
track number "00" and "P – 01"
(program memory number 1), and the MEMORY indicator will be flashing.
3.) Select the disc number which
contains the first track to be
programmed by pressing the CD/
DISC SKIP button until the
desired DISC number appears in the display. Example: Disc 3
4.) Press the Skip
to select the first track to be
programmed.
Example: Track 7
5.) When the desired disc and track
numbers appear in the display
press the TIME-SET/ MEMORY
button again to enter that disc
and track in Program Memory number 1. The track number display returns to
"00" and the Program Memory number display advances to "P – 02".
MS3103_ib012803.p65
BUTTON TO STOP PLAYBACK BEFORE
DISC
1
DISC
1
DISC
3
or buttons
DISC
3
DISC
3
25
25
TOTAL
TRACK # PROGRAM #
28/1/2003, 11:36
CD
CD
MEMORY
CD
MEMORY
CD
MEMORY
CD
MEMORY