Emerson MS3103 Owner's Manual page 19

NOTE: You may also select the Preset (Channel) numbers directly by pressing
the appropriate number buttons on the remote control while the MEMORY indicator
is flashing. To select Preset (Channel) numbers 1 through 9 press the corresponding
number buttons. To select Preset (Channel) numbers 11 through 19 press the
"+10" button first and then appropriate number button. To select Preset (Channel)
number 20, press the "+10" button twice, then press the "0" button.
Recalling Preset Stations
1.) Press the TUNER/BAND button to select the Tuner function and the desired
band.
2.) Press the PRESET UP/RANDOM or PRESET DOWN/REPEAT buttons on
the front panel or the remote control to select the desired Preset (Channel)
number.
NOTE: You may also select the Preset (Channel) numbers directly by pressing
the appropriate number buttons on the remote control. To select Preset (Channel)
numbers 1 through 9 press the corresponding number buttons. To select Preset
(Channel) numbers 11 through 19 press the "+10" button first and then appropriate
number button. To select Preset (Channel) number 20, press the "+10" button
twice, then press the "0" button.
Changing Preset Stations
To change any preset station simply enter a new station in the Preset (Channel)
number that you wish to change. When the new station is entered in the memory
the previously memorized station will be erased.
MS3103_ib012803.p65
18
18 28/1/2003, 11:36