HP 9000 rp4440 Upgrade Manual page 8

A7124a to ab383a configuration a7134a to ab383a configuration

Hide thumbs Also See for 9000 rp4440:

Table of Contents

Overview—Server Upgrade

Overview

Step 3. Shut down your server (disconnect AC power) and remove the processor extender board from the

server chassis.

Step 4. Remove old processors and install new processors on the processor extender board.

Step 5. Set the IPF switch on the Processor Extender Board.

Step 6. Select the processor type on the IO baseboard.

Step 7. Enable the onboard VGA on the IO baseboard and remove the VGA port cover plate.

Step 8. Reinstall the processor extender board in the server chassis.

Step 9. Attach the new product ID labels. (Identify the server as the new configuration.)

Step 10. Power up the server, answer prompts, and verify hardware.

Step 11. Install the Operating System. Refer to the Operating System documentation.

Chapter 1

Table of Contents

Integrity rx4640