CAUTION
CAUTION
Chapter 2
Test the alignment of the assembly to the socket by gently moving the assembly back
and forth with the palm of your hand—you should feel little or no sideplay. However,
because the assembly is not yet tightened, it may tilt slightly towards the center of
the extender board—this is acceptable.
Before locking the processor assembly into its socket, ensure that the power cable is
not pinched between the heatsink and sheet metal frame of the extender board. Also,
ensure that the two power cable ends attached to the CPU assembly do not come
Upgrade Procedures for 1.3 GHz (A7158A) or 1.5 GHz (A7159A) Processors
Introduction
27