Dvd Player; Controls & Features; Loading And Playing A Disc; Programming A Loaded Disc - GPX PDB1077 User Manual

DVD Player

Controls & Features
1
4
7
8
9
8
1. Source / Setup
Press Source to switch between DVD, AV In, and
modes. Press OK to confirm selection.
Press Setup to access DVD player menus, settings,
and options.
2. Stop / Play
Press to stop playing a loaded disc.
Press to play or pause a loaded disc.
3. / OK /
Press to skip tracks or chapters.
2
Press to skip between chapters or tracks.
Press OK to confirm selections.
Press to search through an individual
chapter or track.
3
4. Disc Door Release
Press Open to open the disc door. Load CDs or
DVDs label side facing up.
5 5. Pair / USB/SD
Pair to pair to the included
Press and hold
headphones (see pg. 13).
While in DVD mode, press USB/SD button to
6
switch sources between USB or SD modes.
6.
Press to adjust the volume level.
7. Stereo Headphone Jack

Loading and Playing a Disc

1. Press Open to open the Disc Door.
2. Load a disc into the player, label side facing up, then close the disc door.
10
3. After a disc is loaded, it will begin playing automatically. If the disc does not begin playing automatically, press
the Play/Pause button. Use the controls on the player or the remote to play media, navigate settings menus, etc.
11

Programming a Loaded Disc

1. While the loaded disc is playing, press the Prog button on the remote.
2. Use the Arrow buttons to select a program slot.
12
3. Use the Number Keypad to enter in the chapter and title, or track.
4. Use the Arrow buttons to highlight the on-screen START button and press the OK button to begin playing.
13
14
8. USB Port
9. SD Card Slot
10. 3.5mm AV Out
Use a 3.5mm to RCA audio/video cable (not
included) to connect to another device or screen
and play media through the AV Output.
11. 3.5mm AV IN
Use a 3.5mm to RCA audio/video cable (not
included) to connect to another device or screen
and play media from the connected device onto
the portable DVD player.
12. DC Power Port
Connect power adapter to charge battery and
power the unit.
13. Power Switch
Slide to power ON or OFF.
14. Remote Sensor / LED Indicators
Aim remote at this sensor (see pg. 11).
Power ON + Battery Charging - Solid green light.
Charging Battery - Solid red light (player OFF).
Charging Complete - No lights.
Bluetooth Unpaired - Flashing blue light.
Bluetooth Paired - Solid blue light.
9