Table of Contents
Advertisement
Installing the Projector
Effective Range and Distance of the Remote Control Unit
Using as a wireless remote control unit
The operable distance of the remote control unit is about 7 m for direct reception. The remote control unit can be used by having
the transmission signal reflected off a screen. In this case, please set the total distance A + B where A is the distance from
projector to screen and B is the distance from screen to remote control, within 7 m. The operable angles of the remote
control unit are 30˚ right and left, and 20˚ up and down.
• As the effect of signals reflected from the remote control
unit differ with the type of screen used, effective range
and distance may decrease.
Screen
20˚
20˚
B
Remote Control Unit
Using as a wired Remote Control
By connecting a separately sold wired remote control via remote cable to the [REMOTE] terminal, the remote control can be
used as a wired control unit.
• When connected to the remote cable, the supplied remote control's transmitter and the projector's sensor do not function.
• Please keep within the range of the remote cable length. Warranty is not extended to the case where an extension cord is
used.
QUICK
ALIGN.
OPERATE
PC
VIDEO
HIDE
DIGITAL
FREEZE
VOLUME
ZOOM
PRESET
MENU
ESCAPE
ENTER
When the remote control unit fails to work properly
•
When the batteries in the remote control unit are exhausted, improper functioning will occur. Please replace with new
batteries.
•
When either the remote control unit or projector alone is connected to the remote cable, the item connected will not be
able to work. Please check the cable connection.
•
When a remote cable is connected to the projector, the supplied remote control becomes inoperable.
When operating via the supplied remote control, confirm that the cable is not connected to the projector.
18
30˚
Remote Control Sensor
30˚
(rear)
Projector
A
Wired remote
control
(sold separately)
Remote Cable (sold separately)
RM-M3010
QAM0081-001 (approx. 3 m)
QAM0247-001 (approx. 15 m)
❈ The [ESCAPE] button on the separately sold remote control (RM-M3010) is equivalent
to the [EXIT] button on the supplied remote control unit. There is no equivalent to the [H-
KEYSTONE], [V-KEYSTONE] and [FOCUS] buttons found on the supplied remote con-
trol.
• Aim the remote control unit towards the remote
sensor on the front or rear of the projector. The
operable distance of the remote control unit is
about 7 m for direct reception. If the remote
control fails to work properly, move closer to
the projector.
Projector
20˚
20˚
RS-232C OUT
REMOTE
CONTROL
30˚
30˚
Remote Control Unit
Projector
Advertisement
Table of Contents
