Chicago Electric 66301 Assembly, Operation And Maintenance Instructions page 3

Table of Contents

Advertisement

3.
Do not operate this Electric Paint
Shaker with a damaged cord or plug
or after it malfunctions or has been
damaged in any manner.
4.
Do not use this product in a damp or
wet location.
5.
Do not clean with metal scouring
pads. Metal pieces can break off the
pads and touch electrical parts involv-
ing risk of shock.
power cord safety
1.
this electric paint shaker comes
with a grounded, 3-prong power
cord. A short power supply cord is
provided to reduce risks resulting
from becoming entangled in or trip-
ping over a longer cord.
2.
Longer extension cords are available
and may be used if care is exercised
in their use.
3.
If a long extension cord is used,
a.
the marked electrical rating of the
(detachable power supply cord or)
extension cord should be at least as
great as the electrical rating of the
tool.
b.
if the tool is of the grounded type,
the extension cord should be a
grounding type 3-wire cord, and
c.
the longer cord should be arranged
so that it will not drape over the
counter top or workbench where
it can be pulled on by children or
tripped over.
General and Specific Safety
precautions
1.
WARNING! To prevent serious per-
sonal injury:
SKU 66301
For technical questions, please call 1-800-444-3353.
a.
Always wear ANSI-approved safety
goggles when operating this Electric
Paint Shaker.
b.
Check for loose or broken parts be-
fore using and DO NOT use if any-
thing abnormal is found. Have the
Electric Paint Shaker repaired before
using.
c.
Verify that all containers are securely
closed before placing them on this
Paint Shaker.
d.
Securely fasten Hold Down Bar (4)
to lid of container, and thread the
Safety Lock Nut (44) against the
Hold Down Bar before turning on
timer.
e.
DO NOT allow children to use and/or
play with this Electric Paint Shaker.
2.
DO NOT use this Electric Paint Shak-
er while under the influence of alco-
hol or drugs. Read warning labels if
taking prescription medicine to deter-
mine if your judgment or reflexes are
impaired while doing so. If there is
any doubt, DO NOT operate this tool.
3.
DO NOT use this Electric Paint Shak-
er for other than it's intended use.
4.
Maintain labels and nameplates on
the appliance. These carry important
safety information. If unreadable or
missing, contact Harbor Freight Tools
for a replacement.
5.
WARNING: Handling the cord on
this product will expose you to lead,
a chemical known to the State of
California to cause cancer, and birth
defects or other reproductive harm.
Wash hands after handling. (Califor-
nia Health & Safety Code § 25249.5,
et seq.)
Page 3

Advertisement

Table of Contents
loading

Table of Contents